TMH031B
Sold Out
Roto Trem Standard
Only 0 left in stock!
The Roto Trem is a square-wave chop tremolo that turns your guitar signal on and off in a hard rhythmic pattern. The speed is controlled with the wheel ranging form about 1 second per cycle to approximately 60 ms per cycle.
CONTROLS:
- Speed Wheel: Sets the tremolo rate from slow chop at 0 to fast pulse at 10.
- Effect On/Off Foot switch: Toggles the tremolo effect on and off.
- Momentary Foot switch: Engages or disengages the effect only while pressed. Release the foot switch to return to the previous state.
- Output Trimmer: A side-mounted trimmer adjusts the output volume of the effect.
POWER:
- Use a standard 9V DC, 0.1A or higher, center-negative power supply with a 2.1 mm barrel connector.
OPERATION:
- Connect your instrument to the input and your amplifier or next pedal to the output.
- Plug in a 9V DC center-negative adapter.
- Set the speed wheel to the desired chop rate.
- Press the effect foot switch to engage or bypass the tremolo.
- Press and hold the momentary foot switch for temporary chop bursts or stutter-style effects, or to temporarily bypass the effect if already engaged.
- Adjust the output trimmer on the side to match your bypass level or set a slight volume lift.
LED BEHAVIOR
- The dual front-panel LEDs flash in sync with the tremolo rate.
For any issues with your Roto Trem, please reach out to hardware@thirdmanrecords.com